|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：吉林工业大学
学位：博士
所在单位：机械工程学院
电子邮箱：pinghu@dlut.edu.cn
扫描关注
- [321]Yue, Ming, Sun, Wei, Hu, Ping, M (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Liaoning Prov, Peoples R China..SLIDING MODE ROBUST CONTROL FOR TWO-WHEELED MOBILE ROBOT WITH LOWER CENTER OF GRAVITY[J],INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING INFORMATION AND CONTROL,2011,7(2):637-646
- [322]李龙, 胡平, 刘立忠, Li, L.(llong702@yahoo.com).刚度不平衡单搭接胶接接头剪切试验与强度分析[J],农业机械学报,2011,42(1):213-217
- [323]范蓉, 郑国君, 胡平, Hu, P.(pinghu@dlut.edu.cn).基于背景网格技术的冲压成形仿真工具自动装配算法[J],机械工程学报,2011,47(2):31-35
- [324]Hu, Ping, Wang, Changsheng, Li, Baojun, Liu, Mingzeng.Filling Holes in Triangular Meshes with Feature Preserved[A],2011,50-51:794-798
- [325]马宁, 武文华, 申国哲, 胡平.高强度钢板热成形研究数值模拟-静力显式[J],计算力学学报,2011,5:34-41
- [326]Hou, Wenbin, Zhang, Hongzhe, Wei, Hu, Ping, HZ (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China..Rapid structural property evaluation system for car body advanced design[J],INTERNATIONAL JOURNAL OF VEHICLE DESIGN,2011,57(2-3):242-253
- [327]马宁, 武文华, 申国哲, 胡平, Hu, P.(pinghu@dlut.edu.cn).高强度钢板热成形数值模拟-静力显式[J],计算力学学报,2011,28(3):371-376
- [328]刘瑞军, 胡平, Hu, P.(pinghu@dlut.edu.cn).基于网格的覆盖件曲面自动补孔算法[J],吉林大学学报. 工学版,2011,41(5):1322-1325
- [329]Kan, Dongbin, Liu, Lizhong, Hu, Ping, Ma, Ning, Shen, Guozhe, Han, Xiaoqiang, Ying, Liang.Numerical Prediction of Microstructure and Mechanical Properties During the Hot Stamping Proces...[A],2011,1383:602-609
- [330]亓昌, 杨姝, 胡平.Magic Cube Approach Application on Crashworthiness Design of Front Rail for Weight Reduction[J],Advanced Materials Research,2011,308(308):668-673
- [331]胡平.从非协调有限元到非协调等几何分析[A],2011
- [332]胡平.A four-node Reissner-Mindlin Shell with assumed desplacement Quasi-conforming Method[J],Computer Modeling in Engineering and Science,2011,73(2):103-135
- [333]张向奎, 胡平.板材多步逆成形法中间构型中的优化问题[A],2011,384-384
- [334]胡平, 李宝军.Filling Holes in Triangular Meshes with Feature Preserved[J],Applied Mechanics and Materials,2011,50(1):794-798
- [335]马宁, 胡平, 武文华, 申国哲, 郭威, Ma, N..高强度钢板热成形本构理论与实验分析[J],力学学报,2011,43(2):346-354
- [336]李龙, 胡平, 刘立忠, Hu, P.(pinghu@dlut.edu.cn).不同胶层厚度单搭接接头剪切试验与强度预测[J],农业机械学报,2010,41(12):17-21
- [337]Sun H., Shen G., Hu P..Study on magnesium alloy auto body based on front impact[A],2010,86 LNEE(VOL. 1):533-541
- [338]Hou, W., Zhang, H., Hu, P., Pan, X., WB (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Peoples R China..Joint detail simulation by beam element in vehicle body[J],Applied Mechanics and Materials,2010,37-38:603-607
- [339]叶辉, 申国哲, 孙宏图, 刘波, 周定陆, 胡平, Ye, H.(yehuijlu@163.com).基于灵敏度和碰撞仿真的汽车车身轻量化优化设计[J],农业机械学报,2010,41(10):18-22,27
- [340]Li, Baojun, Liu, Xiuping, Yanqi, Hu, Ping, Mingzeng, Wang, Changsheng.Image-Driven Panel Design via Feature-Preserving Mesh Deformation[A],2010,345(PART 2):30-+